GOST 9567-75 Cold Drawn Carbon Seamless Steel Tube For Motorcycle Shock Absorbers
Introduction
GOST 9567-75 is a standard specification that defines the requirements for cold-drawn carbon seamless steel tubes specifically designed for use in motorcycle shock absorbers. These tubes play a critical role in ensuring the performance and ety of motorcycle suspension systems. In this article, we will delve into the material, specification, key features, chemical composition, mechanical properties, steel grade, application, and possible alternative grades of GOST 9567-75 steel tubes.
Material and Specification
GOST 9567-75 outlines the material and specifications for cold-drawn carbon seamless steel tubes used in motorcycle shock absorbers. The standard specifies the following key parameters:
- Tube Dimensions: The standard provides precise dimensions, including outer diameter, wall thickness, and length, to ensure compatibility with shock absorber designs.
- Manufacturing Process: These tubes are produced using a cold-drawing process, which enhances their mechanical properties and dimensional accuracy.
- Surface Finish: The tubes must have a smooth surface finish to minimize friction and wear within the shock absorber system.
- Tolerances: GOST 9567-75 establishes tolerances for dimensions, ensuring uniformity and interchangeability.
Key Features
GOST 9567-75 steel tubes offer several key features that make them ideal for motorcycle shock absorbers:
- High Strength: These tubes are made from carbon steel, providing excellent strength and durability.
- Seamless Design: The seamless construction eliminates the risk of weak points and enhances structural integrity.
- Precise Dimensions: Cold drawing ensures tight tolerances, contributing to better performance and ety.
- Smooth Surface: The smooth surface finish reduces friction and helps in maintaining optimal shock absorber operation.
- Corrosion Resistance: The material used in GOST 9567-75 tubes exhibits good resistance to corrosion.
Chemical Composition
Here is a table presenting the typical chemical composition of GOST 9567-75 steel tubes:
| Element | Composition (% by weight) |
| Carbon (C) | 0.17 - 0.24 |
| Silicon (Si) | 0.17 - 0.37 |
| Manganese (Mn) | 0.35 - 0.65 |
| Phosphorus (P) | 0.035 (max) |
| Sulfur (S) | 0.035 (max) |
Mechanical Properties
The mechanical properties of GOST 9567-75 steel tubes are crucial for their performance in motorcycle shock absorbers. Here is a table presenting these properties:
| Property | Value |
| Tensile Strength (MPa) | 540 - 640 |
| Yield Strength (MPa) | 375 (min) |
| Elongation (%) | 20 (min) |
| Hardness (Brinell, HB) | 163 - 197 |
| Impact Toughness (Joules) | 27 (min) at -20°C |
Steel Grade
GOST 9567-75 specifies the steel grade as ST35.8, which corresponds to the Russian designation. This grade is known for its suitability in cold-drawn seamless steel tubes, offering the necessary strength and performance characteristics required for motorcycle shock absorbers.
Application
GOST 9567-75 steel tubes find their primary application in the manufacturing of motorcycle shock absorbers. These components are vital for ensuring a comfortable and e ride by dampening vibrations and impacts. The high-quality seamless design and excellent mechanical properties of these tubes contribute significantly to the performance and longevity of shock absorber systems.
Possible Alternative Grades
While GOST 9567-75 specifies ST35.8 as the primary steel grade for motorcycle shock absorber tubes, there are alternative grades available from other international standards. Some possible alternative grades include:
- ASTM A519 Grade 1010
- DIN 2391 ST52
- JIS G3445 STKM11A
These alternative grades may offer similar or slightly different properties depending on specific requirements, making them worth considering based on the application and regional preferences.
Haiyan Sanxin Steel Pipe Factory is a leading manufacturer of steel pipes in China. Located in a region with excellent geographical advantages, the factory is situated close to the Zhoushan Port and Ningbo Port.
Our factory covers an area of more than 25,000 square meters and has been in the steel pipe manufacturing business for 20 years. Over this period, we have accumulated a wealth of professional experience, which has helped us establish ourselves as a trusted name in the industry.
At our factory, we specialize in the production of various types of steel pipes, including stainless steel pipe, carbon steel pipe, copper pipe, steel pipe,seamless steel pipe and welded pipe. Our expertise in this field is evident from the 12 patents that we hold, which demonstrate our commitment to innovation and excellence.
Q: Are you trading company or manufacturer ?
A: manufacturer,also can do trading.
Q: How long is your delivery time?
A: Generally speaking,it is 10-15 days if the goods are in stock,or it is 30-40 days if the goods are not in stock, it is according to quantity.
Q: Do you provide samples? is it free or extra ?
A: Yes, we could offer the sample for free charge but need pay the cost of freight.
Q: What is your terms of payment ?
A: Payment<=2000USD, 100% in advance. Payment>=2000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact with me.
Product Tags:
|
|
GOST 9567-75 Cold Drawn Carbon Seamless Steel Tube For For Motorcycle Shock Absorbers Images
|
